4/6/2024 0 Comments Mikrotik hap liteNow the router boot over network and when the red lamp on port 5 light up, the router install openwrt. Reboot the router, while rebooting you must connect your client with the DHCP and TFTP Server to the Internet labled port (Port1) on the router. Save the configuration and restart tftpd32, so the DHCP and TFTP servers starting. Boot File: The filename of the configuration file in the Base Directory 2.TFTP: the Base Directory is the link to the folder, where you have saved the configuration file. Start the program tftpd32 and configure the TFTP and DHCP servers as follows:ġ.GLOBAL: you only has to activate the "DHCP Server" and "TFTP Server". Set boot-device to "try-ethernet-once-then-nand" Navigate to WebFig → System → Routerboard → Settings Open the Browser interface, IP Address 192.168.88.1. The installation procedure is described and maintained upstream in Common Procedures for Mikrotik RouterBoard Products.īoot up the RB952Ui, connect your client to any of the ports 2 to 5 but not the Internet labled port (Port 1).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |